engine mount progress 2

Only a short update as the previous one contained the main information. Here's the engine mounts mostly welded;

I'm not overly happy with the inside welding, but it's strong enough. The outside welding is a bit prettier, probably because it was just an easier angle to work with!!

The dishes are just tacked on for now, my gas gauge is basically reading zero now although there is still gas pressure. I might try it tomorrow, but I also need to contact the Adams gas supplier to get a full bottle.

On to the front engine mount now, time to study the photos I made when I had the engine in place. It should be a fair bit easier to do, just two plates with the landrover mount in between them.